Note the additional warranty information listed below in specific regards to the Loegering VTS. This attachment is a supplement to the Loegering Limited Warranty.
-The rubber track warranty is Pro-Rated (by the number of hours on the VTS system) for 12 months or 1000 hour’s whichever comes first after it is installed on the host machine or put into service. Hours are determined by warranty registration card, be sure to complete at time of purchase.
-System components are warranted for a period of 12 months or 1000 hours whichever comes first after it is installed on the host machine or put into service. The warranty covers defective material and/or workmanship. This does not cover the normal wear of components due to application and use. Hours are determined by warranty registration card, be sure to complete at time of purchase.
-Host machine specifications should not be exceeded with the use of the Loegering VTS. Consult your machine operator’s manual for machine capacities and specifications.
-Proper track tension is essential to the normal wear of the Loegering VTS. Consult your VTS owner’s manual for proper VTS track tension specifications.
-Loegering VTS rubber track is subject to cuts, tears, etc. when used in abrasive material. This will significantly decrease the life of your rubber track and articles such as gravel, demolition material, rebar, broken concrete, rocks, clearing debris, stumps, sand, etc. should be avoided for longer track life. The more abrasive your application, the less life you will see on your system components and rubber track.
-Loegering VTS rubber track is also subject to increased wear if used on concrete and asphalt, particularly during extreme heat. This application will also affect the life of your rubber track.
-Avoid abrupt turns on inclines to decrease the chance of derailing your rubber track from the system.
-Avoid abrupt turns to decrease the wear on the rubber track and the track assembly components.
-Loegering VTS should not be used in temperatures below -13o F.
Warranty only covers the replacement components if they are installed at an authorized Loegering VTS Dealer.
The Warranty Registration form must be filled out and sent to LOEGERING MFG. upon sale of the VTS System or at the time the VTS System is put into Service.
THE VTS SYSTEM IS NOT COVERED BY WARRANTY UNLESS THE WARRANTY REGISTRATION FORM IS SENT TO LOEGERING MFG.